|
| Machine
Parts - Uni-Matic |
|
menu.gif
|
| Description |
Type |
Part # |
| Backing Plate/Thick-Thin |
|
|
| Deflector Plate |
12 x 5.5 x 24" |
508-10-280 |
| Dawg, Thick-Thin |
1/2 x 1/2 x 4.91" |
508-10-247 |
| --- Spring |
3/8 x 2" Blue |
950-30-577 |
| --- Block, Spring Thrust |
1/2 x 1 x 1-1/2" |
508-10-246 |
| --- Plate, Fastening |
1/4 x 1-1/2 x 6-3/8" |
508-10-249 |
| --- Pin, Dowel |
3/16 x 3/4" |
950-70-938 |
| Bearings |
|
|
| Bearing, Pillow (#1 & #2) |
1-1/4" Center Drive Shaft |
950-30-1220 |
| Bearing, 2-Bolt Flange |
1" Bore |
950-30-005 |
| Bearing, Drive Conveyor |
1-1/4" Bore |
950-30-007 |
| Bronze Chain Locators |
|
|
| Lower Chain Locator |
5-1/2" Aluminum Bronze |
500-10-545 |
| Lower Chain Locator |
7" Aluminum Bronze |
500-10-546 |
| Chain Hold Down |
1/2 x 1/2 x 5" A. Bronze |
550-10-403 |
| Chain Hold Down |
1/2 x 1/2 x 2.5" A. Bronze |
500-10-542 |
| Chain Hold Down (Beveled) |
1/2 x .56 x 2.5" A. Bronze |
550-10-1022 |
| Crank Handles |
|
|
| Handle, Crank |
Rail FMS and Hopper FMS |
500-10-1050 |
| Handle, Crank |
Hopper Jack |
500-10-272 |
| Handle Only |
For Cranks Above |
307289 |
| Wheel, Crank |
Head Jack |
500-20-139 |
| Wheel, Crank |
Chuck (Nail Width) |
500-20-1032 |
| Hopper FMS Spring |
|
950-30-662 |
| Flite Bar Pins |
|
|
| Flite Bar Pin, #1 Machine |
6MM x 3-1/2" |
500-10-537 |
| Flite Bar Pin, #2 Machine |
6MM x 1-1/2" |
500-10-536 |
| Jacks |
|
|
| Hopper Jack, Worm Gear |
Joyce WJ-1000-9 |
950-30-534 |
| Hopper Jack, Worm Gear(Old) |
Mounted Up-Side Down |
950-30-528 |
| --- Screw, Worm Gear |
Hopper Jack (Flange-End) |
950-30-535 |
| Head Jack, Worm Gear |
Simplex 1 Ton |
305234 |
| --- Coupler, for above |
|
305247 |
| **Head Jack Kit |
(2) Jacks, Couplings, Tie Bar |
305248 |
| Screw, Worm Gear (Standard) |
Simplex 10" Gear |
950-30-533 |
| --- Screw, Worm Gear |
Simplex 8" Gear |
950-30-527 |
| Head Jack, Worm Gear (Older) |
Joyce WJ-1000 9 |
950-30-528 |
| --- Screw, Worm Gear |
Head Jack (Threaded-End) |
950-30-529 |
| Rail Springs |
|
|
| Pressure Pad, Rail |
#1 Machine |
500-20-1493 |
| --- Spring, Pressure Pad |
3/8 x 2-1/2" Red |
950-30-606 |
|
3/8 x 3" Red |
950-30-607 |
| Spring, Rail Side |
#2 Machine |
500-10-441 |
| Spring, Entry |
#2 Machine LBL |
508-10-421 |
| Spring, Entry |
#2 Machine Non-LBL |
500-10-440 |
| Rail Wear Strips |
|
|
| #1 Rail Wear Strips (60 & 72") |
1/8 x 1-1/2 x 38" |
508-10-397 |
| Replacement Rails |
|
|
| #2 LBL Rail (Non-Spring) |
Complete Assembly |
500-20-1379S |
| #2 LBL Spring Rail |
Complete Assembly |
500-20-1380S |
| Safety Gates |
|
|
| Magnet, Door Latch |
Nail Chuck Gate |
950-30-945 |
| Bracket, Door Latch Magnet |
Nail Chuck Gate |
950-30-946 |
| --- Screw, Mounting |
6-32 x 1/4" Pan Head |
950-70-001 |
| --- Shoulder Bolt |
Safety Gate Mount |
950-70-609 |
| Scales |
|
|
| Set-Up Scale, Machine (LH) |
60" Machine (18-1/2") |
508-10-690 |
| Set-Up Scale, Machine (RH) |
60" Machine (18-1/2") |
508-10-691 |
| Set-Up Scale, Cam |
60" Machine (60") |
500-10-692 |
| Set-Up Scale, Cam |
72" Machine (72") |
518-10-692 |
| --- Screws, Fastening |
1/4-20 x 1/2" Pan Head |
950-70-099 |
| Sprockets (Both Machines) |
|
|
| Sprocket, Larger Idler |
7" Diameter #60 28T |
500-20-766 |
| Sprocket, Idler |
#60 15T |
950-30-789 |
| Sprocket, Flite Bar Drive |
Taper Lock #60 28T |
950-30-794 |
| --- Bushing, Sprocket |
1-1/4" Bore |
950-30-821 |
| Sprocket, Flite Bar Rear (#1) |
3/4P 28T 2.83 (Entry Idler) |
500-10-833 |
| --- Bearing, Sprocket |
1-1/4" Bore (Entry Idler) |
950-30-055 |
| Sprocket, Flite Bar Rear (#2) |
#60 28T (Idler-Center) |
500-10-832 |
| --- Bearing, Sprocket |
1" Bore (Idler-Center) |
950-30-053 |
| Sprocket, Flite Bar Rear(#2) |
#60 28T (Duo-Idler Outside) |
500-10-831 |
| --- Bearing, Sprocket |
5/8" Bore (Duo-Idler Outside) |
950-30-050 |
| Sprocket, Conv. Shaft Drive |
Taper Lock #50 32T |
950-30-754 |
| --- Bushing |
1-1/4" Bore |
950-30-821 |
| Sprocket, Motor Drive |
Rev Taper Lock #50 15T |
950-30-1376 |
| Bushing, Sprocket |
1" Bore |
950-30-816 |
| Idler Sprocket, Gearbox |
#50 15T |
950-30-747 |
| Stringer Hold-Downs (#1 Machine) |
|
|
| Bar, Main Hold-Down(Tall) |
1-1/4 x 1-1/4 x 24.56" |
500-10-1964 |
| --- (Standard) |
1-1/4 x 1-1/4 x 18-56" |
500-10-390 |
| Clamp Plate, Hold-Down Bar |
3/8 x 1-1/4 x 8-1/2" |
500-10-1063 |
| Roller Cam Yoke |
1" Bearing 3/8" Bore |
950-30-210 |
| Pin, Roll |
3/8 x 1-1/4" |
950-70-930 |
| Bolt, SHC |
3/8 x 1" |
950-70-279 |
| Washer, Hardened |
3/8" (Black) |
950-70-858 |
| Tools |
|
|
| 3/8" Ratchet |
SK |
950-30-836 |
| --- Extension, 3/8" |
3" |
950-30-840 |
| Socket, 3/8" |
9/16" |
950-30-849 |
| --- Socket, 3/8" (Deep Well) |
15/16" |
950-30-1757 |
| --- Socket, Allen Drive |
3/16" |
950-30-841 |
| --- Socket, Allen Drive |
5/16" |
950-30-842 |
| 1/2" Ratchet |
SK |
950-30-837 |
| --- Socket, 1/2" (Deep Well) |
1-1/16" |
950-30-839 |
| Allen Wrench Set |
1/16 x 5/16" |
950-30-843 |
| Allen Wrench, T-Handle |
5/32" |
950-30-858 |
|
3/16" |
950-30-859 |
| Prybar |
|
950-30-847 |
| Screwdriver, Large |
11" Long |
950-30-844 |
| Screwdriver, Overhead Light |
Torx-Style |
950-30-1297 |
| Demagnetizer |
Radio Shack |
950-30-853 |
| Locktite, Blue |
Small(10 ml) |
950-30-169 |
| --- Red |
Large( 50 ml) |
306122 |
| Tie Bars |
|
|
| Tie Bar, Head (Uni-Matic) |
5/8 x 78-1/2" |
560-10-163 |
| --- Nut, Flange |
5/8"-11 |
950-70-810 |
| Tie Bar, Hopper Jack (60") |
3/8 x 70.06" |
508-10-290 |
| --- Coupling, Shaft |
3/8" |
500-10-1285 |
| --- Coupling, Shaft(Old) |
1" x 4" |
500-10-1073 |
| --- Nylon Washer |
.39 x 1.12 x .12" |
950-70-1050 |
| --- Clamp Collar |
3/8" Bore |
950-30-308 |
| --- Set Screw |
10-32 x 1/4" |
950-70-687 |
| --- Keystock |
.12 x .12 x 1.5" |
500-10-473 |
| Tie Bar, Head Jack (60") |
.44 x 67.63" |
508-10-243 |
| --- Coupling, Shaft |
.44" Bore |
500-10-244 |
| --- Set Screw |
10-32 x 1/4" |
950-70-687 |
| --- Keystock |
.12 x .12 x 1.5" |
500-10-473 |
|
|
